Root Mounted Feeder Pillars

39 products

Showing 25 - 39 of 39 products

Showing 25 - 39 of 39 products
View
Save £120.00
Galvanised Steel Root Mounted Feeder Pillar 1200mm x 450mm x 1350mm - GLV350Galvanised Steel Root Mounted Feeder Pillar 1200mm x 450mm x 1350mm - GLV350
Galvanised Steel Root Mounted Feeder Pillar 1200mm x 450mm x 1350mm - GLV350
Sale price£1,295.00 Regular price£1,674.00 exc. VAT
RB1250-Black-FrontRB1250CabinetDarkGreenOpen
Stainless Steel Permanent Supply Kiosk 1250mm x 430mm x 1265mm - EPSS60ERBS1550PlinthNatural
Stainless Steel Temporary Supply Kiosk 1250mm x 430mm x 1265mm - ETBSS60Stainless Steel Temporary Supply Kiosk 1250mm x 430mm x 1265mm - ETBSS60
RB1550-Black-FrontERBS1550PlinthNatural
Save £252.00
RMC1250_CabinetST1600 Plinths in Cabinet
Stainless Steel Walk In Enclosure 1250mm x 600mm x 2000mm - ERMCS1250-600
Sale price£3,025.00 Regular price£3,882.00 exc. VAT
Save £462.00
RMC1250_CabinetST1600 Plinths in Cabinet
Stainless Steel Walk In Enclosure 1600mm x 800mm x 2000mm - ERMCS1600-800
Sale price£3,450.00 Regular price£4,602.00 exc. VAT
Save £246.00
RMC1250_CabinetST1600 Plinths in Cabinet
Stainless Steel Walk In Enclosure 1250mm x 950mm x 2000mm - ERMCS1250-950
Sale price£3,750.00 Regular price£4,746.00 exc. VAT
Save £396.00
RMC1250_CabinetST1600 Plinths In Cabinet
Stainless Steel Walk In Enclosure 1600mm x 950mm x 2000mm - ERMCS1600-950
Sale price£4,350.00 Regular price£5,616.00 exc. VAT
Save £288.00
Galvanised Steel Root Mounted Feeder Pillar 1500mm x 450mm x 1600mm - GLV572 (5mm)Galvanised Steel Root Mounted Feeder Pillar 1500mm x 450mm x 1600mm - GLV572 (5mm)
Galvanised Steel Root Mounted Feeder Pillar 1500mm x 450mm x 1600mm - GLV572 (5mm)
Sale price£3,175.00 Regular price£4,098.00 exc. VAT
Save £180.00
Galvanised Steel Root Mounted Feeder Pillar 2000mm x 450mm x 1600mm - GLV580 (5mm)Galvanised Steel Root Mounted Feeder Pillar 2000mm x 450mm x 1600mm - GLV580 (5mm)
Galvanised Steel Root Mounted Feeder Pillar 2000mm x 450mm x 1600mm - GLV580 (5mm)
Sale price£3,395.00 Regular price£4,254.00 exc. VAT
RMC2100CabinetST1600 Plinths in Cabinet
RMC2100CabinetST1600_Plinths_in_Cabinet
Save £240.00
Galvanised Steel Root Mounted Feeder Pillar 2500mm x 450mm x 1600mm - GLV590 (5mm)Galvanised Steel Root Mounted Feeder Pillar 2500mm x 450mm x 1600mm - GLV590 (5mm)
Galvanised Steel Root Mounted Feeder Pillar 2500mm x 450mm x 1600mm - GLV590 (5mm)
Sale price£3,675.00 Regular price£4,650.00 exc. VAT
A root mounted feeder pillar is an electrical enclosure featuring an integral 'root' section designed to be buried below ground level. These are the industry standard for roadside electrical services, street lighting control, and localized power distribution in public areas where high stability and vandal resistance are required.
Root mounting provides superior stability and security. By burying the base section (typically 300mm deep) directly into the ground or a concrete foundation, the pillar becomes significantly harder to move, tilt, or tamper with, making it ideal for sites prone to high winds or potential vehicle impact.
Our range is primarily manufactured from 2.0mm thick Stainless Steel and finished with a robust powder coating. This ensures maximum service life and corrosion resistance in exposed outdoor environments, including coastal areas.
Hinged doors (ERHS series) are best for quick, regular access. Lift-off doors (ERS series) allow the entire front panel to be removed, providing a completely unobstructed workspace—ideal for technicians carrying out heavy maintenance or installing large equipment in tight spaces.
These pillars are typically rated to IP46/IP24. This provides robust protection against the ingress of rain and wind-blown dust, ensuring the internal electrical connections remain dry and safe.
Standard installation usually involves a 'bury to line' mark on the pillar, typically around 300mm. We recommend excavating a hole at least 200mm wider than the pillar on all sides and backfilling with concrete (ST4/C20 mix) to ensure a permanent, level fix.
Yes, our feeder pillars usually include a treated plywood backboard. These are designed to take a load of up to 20kg, allowing for the secure mounting of cut-outs, isolators, and distribution equipment.

Recently viewed